If you’re building or renovating a home in Chandigarh, Mohali, Panchkula, or Zirakpur, there’s one decision that’s far cheaper to make now than later: planning for smart home automation. Wiring for automation during construction costs a fraction of retrofitting it afterward — and it gives you a cleaner, more capable, fully integrated home. Here’s how to get it right in 2026.
Why the construction stage is the best time to plan automation
Once walls are plastered and painted, adding wired automation means cutting channels, running new cables, and repairing finishes. During construction, the same wiring is quick, invisible, and inexpensive. Planning early means you can:
- Lay clean cabling for a wired KNX backbone with no wall damage later
- Position switches, sensors, and control panels exactly where you’ll use them
- Provide for cameras, door locks, and network points at the right spots
- Future-proof the home so you can add features room by room without rewiring
What to plan for at each stage of the build
Electrical & wiring stage
This is the most important window. Decide which rooms get smart lighting, where you want scene controls and sensors, and whether you’re going fully wired (KNX) or wireless. Conduits and control wiring are laid now, along with provisions for curtains, HVAC, and security.
Networking stage
A smart home needs a strong, reliable network. Plan wired LAN points and Wi-Fi access-point locations so every corner has solid coverage — essential for cameras, streaming, and app control.
Finishing stage
Smart switches, panels, locks, and devices are installed and configured, scenes are programmed, and the whole system is tested and handed over with training.
Wired KNX or wireless — which for a new home?
For a new build or full renovation, a wired KNX system is usually the best long-term choice: it’s the global standard for reliability, works entirely offline, and integrates lighting, climate, security, curtains, and energy management into one seamless system. Where full wiring isn’t practical, we combine KNX with Zigbee and Wi-Fi so every part of the home is covered. Our Wi-Fi vs Zigbee vs KNX guide explains the trade-offs in detail.
Smart features worth planning into a new home
- Lighting: scenes, dimming, and sensor-based control in every room
- Security: CCTV, video door phone, and door sensors wired from day one
- Access: smart door locks and access control at the main entry and gate
- Comfort: motorised curtains, AC and fan automation, and climate control
- Efficiency: energy monitoring to keep running costs low
Work with a team that coordinates with your builder
The best results come when your automation partner works alongside your architect and electrician from the start. We survey your plans, recommend the right system for your home and budget, coordinate the wiring during construction, and install, program, and support everything — across the Tricity.
Planning a new home? Explore our home automation services, see what’s possible in your city on our Mohali and Chandigarh pages, or book a free consultation to plan automation into your build.
New Home Automation — FAQs
When should I involve a home automation company during construction?
As early as possible — ideally before the electrical wiring stage. That’s when cabling for KNX, sensor positions, and network points can be planned cleanly and at the lowest cost.
Is it much cheaper to wire for automation during the build?
Yes. Running cables and provisions during construction avoids breaking walls and repairing finishes later, which makes wired automation significantly more affordable than a post-construction retrofit.
Do I have to automate everything at once?
No. You can wire and provide for automation during the build, then activate features in stages — starting with lighting and security and adding more over time.
Do you coordinate with my architect and electrician?
Yes — we work alongside your build team across Chandigarh, Mohali, Panchkula, and Zirakpur to plan, wire, install, and support your smart home.